“Nitrile” is a material description, not a complete compatibility specification. Match protection to the exact resin, washing liquid, contact duration and task.
What to check on a glove product
HSE's glove-selection guidance explains that materials differ in breakthrough time, permeation and degradation. Use the glove manufacturer's data for the actual product; ask the supplier when the SDS does not provide enough detail. HSE's guide is written for employers, but these selection questions are useful when assessing hobby equipment too. Checked 25 October 2026.
- Identify every substance handled, including the wash liquid.
- Check the manufacturer's chemical compatibility information.
- Choose an appropriate fit and sufficient dexterity for tools and slippery parts.
- Follow the replacement and removal instructions; do not assume a visibly intact glove remains protective indefinitely.
Read the SDS precisely
The Standard Resin V2 SDS, section 8, specifies chemical-resistant gloves tested to EN374 but does not determine a glove material or thickness. It also describes tightly fitting protective goggles. Do not convert that into a claim that any disposable nitrile glove is approved. Checked 25 October 2026.
Formlabs recommends nitrile or neoprene gloves for IPA handling, subject to the solvent supplier's SDS. A recommendation for one substance does not settle compatibility with the whole mixture.
Protection is one part of the plan
Gloves and goggles do not replace avoiding contact or meeting ventilation requirements. Use the workspace checklist for the wider process. If resin reaches skin or eyes, use the first-aid links and the product SDS rather than continuing the job.